HPT371 UDMA/ATA133 Controller
BIOS and Device Drivers Readme
Copyright (C) 2001 HighPoint Technologies, Inc. All rights reserved.
Last updated on Nov 27, 2001
*******************************************************************************
Controller & Utility Software:
- BIOS version: v1.1
- Driver version: v1.1
Operating Systems:
- Windows 98/ME
- Windows NT 4.0
- Windows 2000
- Windows XP
*******************************************************************************
Please review this file for important information about compatibility issues and
differences in operation that were discovered after our product manuals were
created. In case of conflict among various parts of the documentation set, this
file contains the most current information.
Contents on the driver disk
----------------------------
Readme TXT This readme file
DISK1 Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
WIN_XP
HPT371 SYS Microsoft Windows XP miniport driver
HPTPRO SYS HighPoint Cache driver
HPT371 INF Microsoft Windows miniport setup file
HPT371 CAT Microsoft Windows CAT file
WIN_2000
HPT371 SYS Microsoft Windows 2000 miniport driver
HPTPRO SYS HighPoint Cache driver
HPT371 INF Microsoft Windows miniport setup file
HPT371 CAT Microsoft Windows CAT file
WIN_NT
HPT371 SYS Microsoft Windows NT miniport driver
HPT371 INF Microsoft Windows miniport setup file
WIN98_ME
HPT371 MPD Microsoft Windows98/ME miniport driver
HPT371 INF Microsoft Windows miniport setup file
PWR371 VXD HPT371 power management driver
BIOS Update
----------------------------
To update BIOS for HPT371 controller, please refer to your mainboard
manual or contact the hardware vendor for updating the BIOS.
Changes from v1.0
----------------------------
o Improved driver performance
o Support 48-bit LBA
o Fix BIOS BBS support
Known Problems
----------------------------
1. Install OS to devices attached to HPT371 controller
Before installing OS to devices attached to HPT371 controller, you must
remove the drives connected to other controllers from your system temporarily.
After OS installation complete, you can put them back.